Electricall

Arvada's Best Electrician

Call Us Now!
720-879-2253
  • Home
  • Why Hire Us
  • About Us
    • FAQ
    • Testimonials
    • Electrician Near Me
    • Electrician Careers
  • Services
    • Emergency Electrical Service
    • Residential Electrician
    • Electric Car Charging Station
    • Commercial Electrician
    • Lighting Design and Installation
    • New Outlets and Switches
    • Panel Repair and Replacement
    • Whole House Surge Protectors
    • Outdoor Lighting
    • Electrical Troubleshooting
    • Hot Tub Wiring
    • Generator Installation
    • Aluminum Wiring Repairs
    • Smoke Alarms
    • Energy Saving Solutions
  • Blog
  • Service Areas
    • Arvada
    • Boulder
    • Broomfield
    • Denver
    • Evergreen
    • Golden
    • Lakewood
    • Louisville
    • Westminster
    • Wheat Ridge
  • Contact

Get Ready For Electric Vehicle Services Equipment

 Electric Vehicle Services Equipment

Electric vehicles are not futuristic anymore; they are already on roads, and if you haven’t thought of switching to electric cars, you are living in the past. Over time there is a surge in the number of electric companies in the US; it has also contributed to this growth.

The prototype of electric vehicles touched the roads of New York in 1896. Electrobat, the first electric car, had a 1.5 horsepower motor, and the top speed was 20mph. It used to last for 25 minutes with a single charge. 

Fast forward to 2022, more than 2 million EVs are registered in the US and are running through the streets. So, if you haven’t made up your mind to buy an electric car, we are here to help you make the right decision.

Why should you switch to an EV?

  • Emission:

The greenhouse gases released by vehicles are one of the biggest causes of global pollution. These gases also cause various health troubles; inhaling them has considerable ill effects on the body.

Electric vehicles do not release any pollutants and are 100% safe for your health and the planet. Being responsible human beings, it is high time we consider making a shift to electric vehicles.

  • Low-cost transportation:

Electric vehicles are more economical considering the current petrol and diesel costs. A standard electric car needs a 33kWh battery to run for 100 miles; taking the current electricity charges into account, an EV costs around $0.04 per mile.

On average, a single charge won’t cost more than $9, which is much cheaper than the fuel costs.

  • Milage:

Range anxiety was an issue that pulled people from buying electric cars. Another thing that makes people worry a lot is running out of battery charge.

However, that is not the condition right now; electric vehicles such as Nissan LEAF e+ can take you up to 240kms on a single charge.

  • Driving comfort:

It is no secret that electric vehicles provide the smoothest driving experiences. You won’t even hear anything other than the soft humming sound while traveling inside an electric car.

Some manufacturers are even placing sound generators to ensure the safety of pedestrians and other vehicles.

  • Increase in the number of electric companies:

One of the primary concerns of early EV owners was the lack of companies providing electric accessories for the vehicle. However, things are different now; many electric companies offer electric vehicle service equipment.

  • Push for electric vehicle:

Electric vehicles are in high demand now, and one of the main reasons for that is the push from the government. California has banned the sales of fuel cars after 2035, and other progressive states are also on the same track. It won’t take much time for the Colorado government to ban the sales of fuel cars.

So, this is the right time to buy electric vehicles!

Things to look at before buying an electric vehicle

Even when electric vehicles have been here for many years, several people are still not sure how to pick the right car for them. One of the aspects that trouble most EV owners is charging. They believe taking these vehicles for long drives is risky.

However, you can overcome this issue if you know the level of the charger.

The following are different level chargers and it’s capacity.

  • Level-1 charger:

It is similar to the USB that any electric company provides, and you can charge that from your home. If convenience is your concern, level 1 chargers are the best option for you; it works well with any of the latest electric vehicles.

As the Level-1 charger is small compared to the other chargers, you can carry it with you; it fits in the regular three-prong pin at home.

The major downfall of a level 1 charger is charging time; it takes 12-24 hours to charge an EV fully. If you are a regular user, who charges the car overnight and uses it daily for short trips, this charger is perfect.

However, if you go on long trips regularly, we won’t advise you to get a level-1 charger.

  • Level-2 Charger:

It is the right option for EV owners who prefer fast charging over convenience. Even when the charging time depends on the vehicle, it is definite that a level-2 won’t take half the time of a level-1 charger.

Let us take the example of a Mercedes B Class 250e; it takes around 20 hours to charge the vehicle with a level 1 charger. However, if you connect to a level-2 charger, you can charge the car in 3 hours.

One of the most significant advantages of a level-2 charger is that it is adaptive to smart homes, and you can control them through a mobile application. 

You cannot plug a level-2 charger into a standard plug point like a level-1 charger. It demands a high power output source, like the ones we use for dryers. All you have to do is install a 240-volt power outlet, which a residential electrician can quickly do.

Conclusion!

First things first, congrats on choosing an environment-friendly method of transportation.

Now get your home ready for your electric vehicle. Install high volt power sources by one of Colorado’s most trusted electrical repair companies, Electricall. We provide professional electrical services at the most reasonable rate in the area. If you’re looking for an ev charging station installation service for your property, then call us today! 

Filed Under: Uncategorized

How to transform your home into a smart home?

electrical companies

The concept of smart homes made a sudden shift in the way we practiced our day-to-day activities. The growth of technology and the rapid emergence of electrical companies are the main contributors to these changes. Smart speakers like Alexa and Nest have become an irresistible part of our homes now. 

But the real question still exists, are our homes completely smart?

No, there is more to go. We can do a lot more with the current technologies than ask ‘Alexa’ for the weather status. You can completely control all your home’s electrical appliances with your smartphone; all you have to do is electrically automate your home.

Smart right? 

Continue reading to know how to transform your sweet home into a smart home.

What is a smart home?

Let us begin from the basics; a smart home is the coolest and the most convenient place to live in. From opening the lock of your home to vacuuming your carpets, a smart home will do everything on its own.

Picture this scenario; you are expecting some parcel at your home address while out of town. Wouldn’t it be nice if you had a system to monitor the arrival of parcels? 

That is exactly what smart homes enable you to do; you can monitor your house from any part of the world. All you need is electrical automation from a trusted electrical company.

How does the Internet help?

The smart home was a futuristic concept, and it wouldn’t have been possible without the internet. You can connect electrical appliances and devices through the internet and monitor them remotely.

You can turn any electrical appliance, including lights and thermostat, on and off while you are away from home. You can also connect the security cameras and monitor your home through your smartphone. And for that, you should have a good internet connection active in your home 24-7.

Electrical Automation for Homes

Electrical automation is the next step once you set up a good internet connection for your home. The following are the three components that enable the electrical automation of your home.

  • Sensors: These are the eyes and ears of your smartphone; they will keep a check on the temperature, light motion, humidity, and contact.
  • Controllers: This feature allows you to turn the devices and electrical equipment on and off according to your requirement.
  • Actuator: It is the component that makes your electrical appliances and devices work according to the commands by the controller.

Suppose you are away from home, using your smartphone you can analyze the situations; then, you can give instructions to your devices using the controller, and the actuator makes your appliances perform.

Types of Automation

You can electrically automate your house in any of the following ways:

  • Scheduling: You can set the schedule for each device in your house. If the internet is connected, the devices will automatically perform the actions at the scheduled time, even in your absence. For instance, you can set a time for vacuuming daily, and the machine will start automatically at that time.
  • Triggering: This is where your electrical appliances automatically work when certain conditions are met. For example, you can set your AC in a way that it turns on when someone’s there in the room. Thus, when you come to your room from outdoors, you don’t have to worry about turning on the AC.

Devices under your control

By now, you must know that you can make your home smart with the service of electrical companies. But do you know which devices you can control with automation?

From Light bulbs to your home security system, you can control a great range of electrical equipment. All you have to do is check for good electrical companies near Denver to examine the compatibility of devices.

Here is how you can automate different devices at home:

  • Security system: When you set up a security system for your home, make sure it is connected to Wi-Fi. That way, you will get a live feed from the camera, and you can also talk through the intercom.
  • Light system: A residential electrician can automate the lighting of your home to turn it on and off according to your need.
  • Data Cables: Data cables are an integral part of electrical automation. The ethernet cables ensure a strong internet connection between devices. The connection will go to different devices from a central hub to facilitate automated performance.

Make your home smart.

Automation is the first step to making your home bright and getting your work done even when not there. Your job is easier if you live in Denver as you have Electricall to help you with electrical connections.

Our experienced residential electrician comes to your homes, inspects the connection, and sets up a hub for centralization. That way, you can easily automate your electrical appliances with your mobile and enjoy the sweetness of a smart home.

Filed Under: Uncategorized

Everything You Need To Know About Space Heater

Residential Electrician

What is one thing that you hate most about winters in Denver? 

Ours is unexpected damage to space heaters!

2022 is expecting one of the coldest winters in the past few years, so you have to ensure that your Space heater is ready for it. If your space heater is more than ten years old, then there are high chances of it getting damaged during the peak of winters.

Did you know that an error in the proper functioning of a space heater can also start fires in your home? 

According to the National Fire Protection Association reports, electrical heating equipment is the common cause of most home fires. Almost 81% of the fire deaths in America were due to stationary or portable space heaters.

However, you can prevent such issues with genuine residential electricians’ proper care and service. Scroll down to know how to protect your space heater from damage this winter. 

Know your Space Heater

How much do you know about the space heaters you have been using? Using one for years, throwing them once it gets old, and buying new has been a routine for most of us. It is time to take a closer look into it and understand your heater.

Types of Heaters

Before learning about different types of heaters, get a grip on the process of heating. Heating is generally of three different varieties based on the object it warms. The first one is radiant heating, which warms things; the second is convection heating, which warms the air; the third type of heating is micathermic, which heats both objects and air.

Space heaters are available in four different types:

  • Oil/water filled: A convection model that works by passing hot water/oil through the unit and warming the surrounding air.
  • Ceramic heater is also a convection model with solid ceramic materials inside the unit instead of water/oil.
  • Infrared: It is a radiant water heater that warms the objects in the room with infrared light. It is of significant usage in commercial spaces such as restaurants.
  • Fan-forced: A micathermic heater will keep the air and objects in the room warm. The air is pumped out of the hot metal coil to warm for a long time.

Safety Features

Every heating system comes with many safety features to avoid unexpected fire damages or anything dangerous. Safety features also save you from calling residential electricians for electrical repair frequently. So, before buying a heater, you should inquire about the safety features present in the system and confirm that it is any of the following.

  • Tip-Over Switch: This switch turns off your heater if it is not in an upright position. It saves you from fire hazards.
  • Overheat protection: Heaters with this feature shut down automatically when the heaters start heating above the optimum temperature.
  • Plastic Face: The plastic cover over the metal parts protects you from getting burnt due to overheating.
  • Thermostat: You can set a comfortable temperature on the thermostat and prevent overheating. It will turn the heater on and off according to the atmosphere and keep you warm.

Safety Tips for Space Heaters

We know how exhausting it is to call an electrical repair company for your space heater and not get it fixed properly. However, you can avoid unnecessary complaints about your space heater by taking proper care of it.

Here are some golden tips to save you from frequent electric repairs and your family from heat or fire damage.

  • Three-foot rule:

Always place your space heater three feet away from curtains, bed, carpet, or anything that can catch fire. Don’t even think of keeping it over a rug or anywhere in the high traffic area where tripping chances are higher.

  • Switch off the heater when you are away:

Unattended heaters are one of the significant causes of fires, so never leave your space heater on while you are away. You should take special care if you have children or pets at home; make sure they cannot turn it on by themselves. Keeping your heater off while sleeping is advisable as overheating can start a fire.

  • Be vigilant:

Give your space heater a complete 360-degree inspection before plugging it back in this winter. Check for cracks, dents, or any breaks on the surface of the heater. A small crack can prove dangerous if left unnoticed. If you are unsure of the heater’s condition, call a residential electrician and check it.

The best electrician at your service

If you have a space heater at your home or commercial space, you will need the service of electrical companies. It can be frustrating to search for ‘good electrician companies near me’ and end up with no trusted electricians.

Contact Electricall, one of the most trusted residential electrician companies, is now serving at your location.

So don’t wait for winters to knock on your door; take that space heater out today and call them for a good inspection and service.

Filed Under: Uncategorized

8 Must Know Electrical Tips For Winter

Electrical troubleshooting

Winter’s here, and so are frequent power outages in Colorado. 

We all want to keep ourselves warm during winter, so we keep our space heaters on most of the time. With the increased electricity consumption comes electrical troubles; many electrical appliances may stop working, and power outages become a common issue. This calls for electrical troubleshooting by a professional electrician.

The continuous usage of electrical appliances can cause fire damages and heating issues that affect the safety of your home. Even electricity accidents arising due to heavy snowfall can lead to significant casualties.

So, we compiled the best tips to ensure the safety of electric equipment during winters.

How to ensure the proper functioning of electric equipment during winter?

We know how necessary your electrical appliances are for you during winters. The following are the tips to keep your electric appliance functional during winter.

  • Check the cords:

Winters are also the time of holidays, in which we decorate our homes for Christmas and New Year. Lights are an indispensable part of holiday decorations; make sure the cords of the light and other electrical equipment are in good condition. A minor breakage or any damage at any point can cause electric accidents.

Also, check if the cords are twisted or crimped anywhere on the circuit. The twisted circuit will produce heat inside the wire and eventually fire. So keep a close analysis of the cords in your home.

  • Cover panels:

Electric panels, plugs, power outlets, and other open power sources can also be a source of danger. During winters, snow or mist forms around the power sources and gets trapped inside the power outlet. After a while, it will convert to water and create issues demanding electrical troubleshooting.

Water, as you already know, conducts electricity and can cause trouble in a plug point if left unattended. So close all the power outlets and ensure that they are weatherproof.

  • Label circuits:

Do you have a plan for the electrical emergency at your house? Don’t worry if you don’t; because we have.

Identify and label all the electrical circuits!

You do not have to worry about it if all the circuits are working in good condition. But the issue is that you can’t predict when an electrical emergency pops up.

So, take some time to identify the circuit, mark and label it accordingly. If anything goes wrong, you can cut power directly from the respected circuit. Thus you can save a lot of time and avoid serious accidents.

  • Do not overload:

One of the people’s biggest mistakes is plugging in more than one cord in a single power outlet. Multiple cables create overload in the plug point, leading to heating issues and fire.

Don’t put more than two cords in a single outlet; it can quickly heat the outlet. These are the signs of output overload:

  • Flickering lights
  • Tripping breakers
  • Sizzling from the cord
  • Hot adaptors or plugs

If you notice any of these signs, be cautious, turn off the power, and call for electrical troubleshooting.

  • Cover the cords:

Every home has extension cables running across the room under the carpets, besides the cupboard and many hidden places. Are you sure they won’t cause any accidents?

The ends of the cords might be somewhere at the end of the carpets, and these can be a source of electric accidents during winters. So make sure you cover the ends of the cords with child-proof caps.

  • Unplug at the right time:

Power outages are common during winters; prepare yourself for that. When the power goes off, remind yourself to unplug your electric appliances.

There will be different appliances plugged into different power points at any given time. Keeping them connected during a power outage can be risky. So unplug heavy load appliances like TV and dryer during a power outage.

Do the same in case of power fluctuations, and don’t plug them back until the power is stable.

  • Electrical Troubleshooting:

It is always better to get a professional to look at your home’s electrical panels.

A thorough checkup by a professional residential electrician is the easiest way to keep your electrical connections safe. They will understand the errors in connection beforehand and suggest corrections.

Your electric connection will be winter-ready after an electric repair and electrical troubleshooting by a professional.

Conclusion!

Electricity is not something you can take for granted; slight negligence on your part can create a lot of trouble. Electrical fires and shock accidents are common during winter in Colorado. A proper checkup by a residential electric company is necessary.

However, don’t waste time searching ‘electrician companies near me’; because you have the best electrical company, Electricall, a phone call away.

They are the most trusted electricians with years of experience in electrical repair; so don’t wait; contact them now!

Filed Under: Uncategorized

Dual Function Circuit Breakers vs. Combination Arc-Fault Circuit Breakers

breakers

Without a circuit breaker box with the right electric components and breakers, you are leaving your dwelling or business in danger. A high amount of heat can potentially cause an electrical overload that may trigger sparks, fires, or electrocution. Understanding the difference between a dual-function circuit breaker and a combination arc-fault circuit breaker will give you an idea of how you can make your home or business safer than ever.  

The most widely used electrical circuit breakers are miniature circuit breakers (MCBs), mounded case circuit breakers (MCCB), and residual currency circuit breakers (RRCB). These types may not always be able to mitigate electrical problems by interrupting the flow of current to the outlets. Hence, replacing the standard breakers with either combination AFCI or dual function circuit breaker provides bigger benefits. 

One thing we would like to point out before moving on is that working on a circuit panel or doing almost any kind of electrical work is extremely dangerous and must be done by licensed electricians. Consider contacting a professional electrician in Arvada, CO before installing or replacing a circuit breaker.

What is an AFCI or combination AFCI breaker?

The AFCI is a type of circuit breaker that finds problems in the system. For example, if you are putting up a shelf and drive the nail right through the electrical wire, the conventional breaker may not trip or automatically de-energize to prevent causing a fire. On the other hand, an AFCI breaker will shut the whole circuit down. Generally, it operates to look for the arc.

A combination AFCI circuit breaker is designed to remove the unintentional electrical arcs also known as arc faults that may fire up combustible materials in residential homes or commercial buildings. The AFCI follows a series of arc detection that can spot lower-level arcing in power supply cords and branch circuits.

What it does is it senses two kinds of arcs including:

Series ARC

This is a low current type of arc since it is dependent on the load, which is the reason why it is more difficult to detect compared to parallel arc. An example is if you knick or split a wire, or if an appliance is pushed up against the back of a plug, causing current to be limited by load and supplied by the faulty electrical wiring. As the load increases, the current will also increase.

Parallel ARC

Unlike the series ARC, this is not dependent on the load, instead, it is caused by a resistive short between the neutral and live conductors. Basically, it is arcing across itself and may or may not increase the current high enough to pull the circuit breaker. Often happening due to physical damage to cables or when exposed to conductive objects or liquid.

Normally, a current flows in a smooth wave pattern that goes from high to low, but during arcing, the waveform is disrupted and forms an arc. What the AFCI technology is doing is monitoring the waveform and then effectively suppressing an arc fault by tripping the power.

What is a dual function breaker?

The National Electric Code 2014 now requires AFCI protection on kitchen and laundry room circuits where only GCFIs are usually installed. To provide the best protection, professional electricians would recommend upgrading to a dual function breaker instead of installing a separate GFCI breaker and AFCI receptacle.

A dual-function breaker combines two technologies into one device. It has both GFCI protection and AFCI technology. A GFCI technology measures the current that is going in and out and makes sure that the flow of current is balanced. Whenever it detects even a small difference in the current, that is when it will cut the power. So the dual function breaker provides defense from effects of both arc and ground faults.

Depending on the brand, dual-function breakers usually feature LED indicators, self-test, and lockout. With the self-testing feature, the breaker will test itself and if it finds any faults or if the electronics have been compromised, it will automatically trip.

In a nutshell, a dual function breaker can save you money on repair and will protect you and your family, as well as the person installing the breaker, from electrocution.

You do not have to be a professional electrician to learn the basic functions of a circuit breaker and the whole electrical system in order to reset it yourself. However, having knowledge of the basic functions of a circuit breaker will come in handy especially when ordering repair or replacement from an Arvada electrician. 

Looking for a professional electrician in Arvada, CO?

Upgrading the circuit breaker panel is not a simple task. Circuit box repairs, maintenance, or upgrades demand the expertise of a seasoned local electrician or an electrical service company. Each switch corresponds to a specific room or outlet, and incorrect electrical work might result in electrical device malfunctions, or worse, fire and electrocution.

Searching for an electrician nearby? We have qualified contractors and expert electricians. ElectriCall offers home electric repairs, electrical testing, electrical inspection, home rewiring jobs, and electrical panel upgrades.

Call us today and receive a free electrical project estimate!

Filed Under: Uncategorized Tagged With: Circuit box repairs, Combination AFCI, Dual function circuit breaker

  • « Previous Page
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • …
  • 29
  • Next Page »

Blog Archives

About ElectriCall LLC

ElectriCall logoElectriCall, LLC has been providing electrical services to families, individuals, and businesses since 2011. We are an independent company and proud of it! We are your Arvada electrician.

The team at ElectriCall, LLC has more than 20 years of experience and has been helping homeowners and companies with nearly every type of electrical problem around the Denver area.

Call us today, 720-879-2253 we’re here to help.

We Accept

Different check-out options for business

Site Links

Privacy Policy
Terms and Conditions
Site Map

Our Location

ElectriCall
7980 Robinson Way
Arvada, CO 80004

Phone
720-879-2253

Website
www.electricall.co

Copyright ©2022 - ElectriCall - All Rights Reserved.
WebReach