Electricall

Arvada's Best Electrician

Call Us Now!
720-879-2253
  • Home
  • Why Hire Us
  • About Us
    • FAQ
    • Testimonials
    • Electrician Near Me
    • Electrician Careers
  • Services
    • Emergency Electrical Service
    • Residential Electrician
    • Electric Car Charging Station
    • Commercial Electrician
    • Lighting Design and Installation
    • New Outlets and Switches
    • Panel Repair and Replacement
    • Whole House Surge Protectors
    • Outdoor Lighting
    • Electrical Troubleshooting
    • Hot Tub Wiring
    • Generator Installation
    • Aluminum Wiring Repairs
    • Smoke Alarms
    • Energy Saving Solutions
  • Blog
  • Service Areas
    • Arvada
    • Boulder
    • Broomfield
    • Denver
    • Evergreen
    • Golden
    • Lakewood
    • Louisville
    • Westminster
    • Wheat Ridge
  • Contact

Avoid These 13 Electrical Problems That Will Destroy Your Home Sale

Electrical issues often scare potential homebuyers. Hiring an electrical service in Arvada to repair any electrical problems in your home is one of the upgrades home buyers should not have to request. Here are electrical problems that will destroy your home sale, hence should definitely be avoided.

  1. Outdated wiring systems. Old electrical wirings are often the culprit for house fires. To entice more potential buyers to pay top dollar for your home, increase the home’s safety feature. Replace old wiring systems and make sure electrical outlets are not faulty.

  2. Not enough outlets. One thing potential home buyers do not want to deal with is battling the insufficient amount of power outlets. To impress them, make sure every room in your home has outlets that could cater to their appliances, devices, gadgets, light fixtures and more. It is always convenient to have enough power outlets.

  3. As per building codes, all wirings should run through electrical panels. Any visible DIY electrical work that is not done up to standards can destroy your home sale. Some factors you should consider when doing electric panel replacement include the size of the panel, the materials to be used, and model. Of course, you should also check its functionality or features. 

  4. Double tapping the circuit breakers. This basically means that multiple wires are attached to one circuit breaker that cannot handle the capacity. This issue is often present in older homes and must be checked by qualified electricians like ElectriCall LLC.

  5. Substandard electrical routing. Another red flag that could send homebuyers home is poorly routed electrical wiring. There are specific codes and practices for routing electrical wires. Cables must be placed in safe zones and not exposed. And they should not be positioned against sharp edges. If you think you need an electrical repair service in Arvada, we are the team to work with!

  6. Not doing aluminum wiring repair. Another electrical problem that could have detrimental consequences is not repairing or replacing outdated wirings such as made from aluminum. This kind of electrical conductor tends to get damaged easily so inspection and maintenance is definitely a must.

  7. Over Customizing. Ironically, overly customizing the electrical system of the home can also make buyers become reluctant to purchase the property. Electrical systems need not be fancy. As long as they are optimized to give high-performance, reliable, safe, and can accommodate the needs of the residents, that should be enough.

  8. Not replacing painted outlets.  If you think this is an inexpensive alternative to somehow upgrade the curb appeal of the home, you are wrong. If anything, one proof that a home is poorly renovated can be seen on painted outlets. Instead of being impressed, home buyers will be turned off. Paint can affect the functionality of an outlet. It poses safety concerns since it can contribute to overheating and fire.

  9. Missing GFCIs. Outlets in the kitchen, bath, basement, garage, or locations near a water plumbing should be GFCI equipped. This device will help prevent exposure to electrical shock once the electrical system fails or when it gets wet. It is common for residential homes to have GFCIs protection, so to avoid eyebrows raising, make the necessary upgrade.

  10. Not fixing reversed polarity outlets. Although it sounds like a small issue, not correcting it could be dangerous. Appliances could get damaged and plugging electrical devices could shock someone. However, unlike other electrical issues, this is not something that is visible or can be detected right away. Hiring an Arvada electrician nearby is crucial for testing and repairing of outlets. Expert electricians like ElectriCall LLC can easily identify and correct the situation.

  11. Exposed wirings and splices. Aside from the obvious safety risks, exposed electrical wirings creates an eyesore in the house. Any homebuyer will not  be pleased with such sight. 

  12. Missing electrical panel components. Residential electrical panels are usually rectangular in shape and have two sets of electrical knockouts which are basically openings on the top, bottom, or sides of the electrical panels where wires are inserted. According to residential codes, these knockouts should have plugs snapped into place, especially when not in use.

  13. Overlamping or using light bulbs that are incompatible with the light sockets or fixtures. More often than not, home sellers use high voltage light bulbs during home staging to brighten the interior of the house and create a more appealing effect to attract more buyers. That is very dangerous because such incompatibility can quickly deteriorate the electrical cables.

The bottomline

Avoid these electrical problems that will devalue your property. Some of these issues make the structural integrity of the home below the standards, hence will put the safety of the potential homebuyer at risk. Safety and comfort must be the top priority during and after the sale of home. 

Hire our pro electricians in Arvada! Electrical problems can create inconveniences to both the home seller and potential homebuyer. Get in touch with ElectriCall and we will help you assess the electrical system of your home.

Electrical defects can be corrected by ElectriCall LLC. As a team, we have seen and fixed a variety of electrical challenges that contributed to the success of a home sale. 

Filed Under: Blog Tagged With: aluminum wiring repair, Arvada electrician nearby, electric panel replacement, Electrical repair service in Arvada, ElectriCall LLC

The Benefits of Copper Wiring

Did you know that copper plated wiring will change your home for good? The benefits of copper wiring are immense that you would not want any other kind of material for your own home’s electrical system.

When to replace your electrical wiring

  • If your home was built between 1965 and 1985 when aluminum wiring was predominantly being used as an electrical conductor for most commercial and residential buildings.
  • If your outlets show discoloration or stains, it means that it has been in use for quite a while and have endured enough power surges.
  • If your light fixtures are always flickering whenever you plug an appliance, that means the electrical wiring cannot handle the power load and needs to be updated immediately. Moreover, if the breaker is tripping every now and then, that shows the need for replacement as well.

Contact our qualified electricians right away if you are noticing signs of faulty electrical wirings.

The benefits of installing copper wiring in your home

Is copper wiring in a house safe? Yes, it is. Copper wiring is the ideal material to use for any electrical wiring system. It trumps other materials like Aluminum for these top three reasons:

  • It is non-corrosive, which means it will not rust or degrade even when placed in a rough environment. And because of that, this kind of copper wiring lasts for over 50 years. This is an important benefit considering houses tend to be exposed to excess humidity or moisture that could make other metal materials rust.
  • The primary copper wire properties are ductility and malleability which simply means it can be formed into very thin wires and bent without breaking. 
  • It is not only an excellent conductor, but it is also known to have an impressive coefficient of expansion. So even as more current flows through it, the copper wiring will not easily heat up, expand, and break.
  • It has an impressive melting point. Compared to other conductors, copper is unlikely to melt and start a fire, which is why professionals and qualified electricians choose this material.
  • It is easy to work with which makes the lives of Arvada electricians less stressful. Copper wiring can be stripped easily, bent into shape, and soldered with ease. For that reason, it is so much safer to handle.
  • It is durable, requires low maintenance, and resilient to changing temperatures.
  • It is compatible with other electrical components and materials installed in residential or commercial buildings. Copper works well with other metals without causing damage.

Why electrical copper wires are better than iron wires

First of all, there are different types of copper wires that are being used extensively in different industries like car manufacturing and commercial and residential construction. It has high electrical conductivity and the electricity passing through is not heating the wiring too much for it to break or spark and cause a house fire.

Many Arvada electrician experts would prefer to use copper when doing residential wiring repair. That is because they know that copper wire is durable which means it is capable of withstanding the changes in weather conditions. And because copper wires are braided with multiple threads, they are so much better connectors for electrical appliances and devices that need to be recharged like mobile phones and laptops.

Now, you are probably questioning what is wrong with aluminum and is aluminum wiring safe? 

Just like copper, aluminum is another common material used as an electrical conductor in both commercial and residential. However, unlike copper, aluminum is not as strong as an electrical wiring material.

Long before copper wire became the standard for circuit wirings, aluminum was the ideal option for its cheaper price and flexibility. Unfortunately, if your house is using aluminum wiring, you might find yourself in a constant aluminum wiring fiasco. Since this kind of material has high thermal expansion and contracts when cooled, it can easily become loose, break, and trigger fire hazards. Hence, you will be doing aluminum wiring repair constantly. 

Numerous factors could cause the failure of aluminum wiring connections. That includes its contact resistance against other materials, corrosion, and its Creep or the rate of change it undergoes over time. 

When it comes to aluminum wiring mitigation, you have few options. One method is to rewire the whole structure and install copper wiring and follow the local building code. This may not be the most affordable way, but it will completely remove the aluminum wiring from your home.

Another method is to install a thermal strip known as AlumiConn or COPALUM which is a sealed terminal. Either of these two can be attached to the old aluminum wire to avoid the extensive and costly process of rewiring the whole electrical system.

If you are unsure whether your home has aluminum wiring, checking the electrical panel on your own might not be the best idea. Have the professionals do the investigation for you. 

Our expert electricians can tell you more about the benefits of copper wiring, get in touch with us before you begin rewiring your home.

Filed Under: Blog Tagged With: aluminum wiring mitigation, aluminum wiring repair, arvada electricians, ElectriCall, residential wiring repair

Blog Archives

About ElectriCall LLC

ElectriCall logoElectriCall, LLC has been providing electrical services to families, individuals, and businesses since 2011. We are an independent company and proud of it! We are your Arvada electrician.

The team at ElectriCall, LLC has more than 25 years of experience and has been helping homeowners and companies with nearly every type of electrical problem around the Denver area.

Call us today, 720-879-2253 we’re here to help.

Copyright ©2025 - ElectriCall - All Rights Reserved.
WebReach